Fibaro Single / Double Relay Switch (Z-Wave)
The FIBARO Relay Switch is designed to be installed in standard wall switch boxes or anywhere else where it is necessary to control electric devices drawing up to 2.5kW.
As with all other Actors, FIBARO Relay Switch allows to control connected devices either via the Z-Wave network or via a switch connected directly to it.
£47.52 inc VAT
EAN / Barcode: 5902020528272 | 5902020528289
Compatibility
Fibaro Single / Double Relay Switch (Z-Wave) is compatible with the following systems:
Any Questions?
Our technical team is on hand to solve any problems or help you find the ideal solution.
Description
FIBARO Relay Switch is designed to be installed in standard wall switch boxes or anywhere else where it is necessary to control an electric device drawing up to 2500W.
As with all other Actors, FIBARO Relay Switch allows to control connected devices either via the Z-Wave network or via a switch connected directly to it.
The Single Relay Switch can control one electrical device up to 2.5kW.
The Double Relay Switch can control two electrical devices up to 1.5kW each.
Features:
- Compatible with any Z-Wave Controller
- Advanced microprocessor control
- Executive element – electromagnetic, micro-gap relay switch
- May be oparated by momentary or toggle switches
- To be installed in wall switch boxes of dimensions allowing for installation, conforming to provisions of applicable regulations
Compatibility:
- Compatible with the Fibaro Z-Wave range of products
- Compatible with the Z-Wave market of products
Manuals and Guides
Frequently Asked Questions
What is a Relay Switch module?
Remotely Controlled Relay Switch of FIBARO System is designed to operate in a wall switch box or in locations where the control of an electric device is needed
What voltage Relay Switch module should be powered by?
The Relay Switch should be powered from 110-240V AC (50/60Hz).
What are the differences between 2×1.5kW and 1×2.5kW?
The main difference between 2×1.5kW and 1×2.5kW is number of physical outputs and load capacity.
What voltage can be controlled by modules output?
It can be any voltage up to 240V AC.
Can this module be DC supplied?
No, only previous generation of the device was able to do so.
I want to control the lighting but I do not have Neutral wire. Can I connect Relay Switch to such circuit?
No. The Relay Switch needs to be connected to Neutral Wire. To control circuits where there is no Neutral wire at the switch location please refer to the Dimmer module.
Can I control non-potential output by the Relay Switch module?
Yes, you can – the relay is volt free by default.
What are association groups 1, 2 and 3 for?
Group 1 is assigned to S1, Group 2 is assigned to S2 and Group 3 is only used for reporting module’s state to the controller.
What are S1, S2 for?
These terminals are designed to be connected to the switch. S1 is designed to control O1 output, S2 to control O2 output.
Videos
Product Specifications
Physical and Performance Attributes | |
|---|---|
| Weight | 60 grams |
| Dimensions (L x W x H) | 42.5 × 38.2 × 20.3 mm |
| Dimensions | 42.50 x 38.25 x 20.30 mm |
| Operating Humidity | 0 - 35°C |
Electronics Attributes | |
| Power Supply | 110 - 240V ~ 50 - 60Hz |