AduroSmart ERIA Control Station / Hub UK

On the boot screen of the ERIA app during setup in the right bottom corner

tap on: “New here? Sign Up!” you will then be redirected to the account creation process.

A blue LED means that the hub has no working internet connection, please check the settings of your internet router.

If the light is blinking red, it means that the hub has not been successfully set up.

Check that the hub is connected to the router.

A green led indicates a that the hub is connected to the internet and your home network.

To reset your hub, simply hold down the button on top of your hub until the light turns solid red. The hub will then reset.

When paired before with another hub make sure that your Philips HUE bulb is reset with a touchlink enabled dimming switch and switch the light on then follow the instructions in the ERIA app to initiate searching for the bulb.

To connect your Sylvania bulb to the AduroSmart Hub, first reset the bulb. You can do this by turning the bulb on for 5 seconds, and then turning it off for 5 seconds. Repeat this 5 times. After the 5th time, switch the light on and wait 10 seconds. The light will then blink to confirm that it has been reset. After it has been reset follow the instructions in the ERIA app to initiate searching for the bulb

Make sure that you do not have any signal disturbances due to metal coated surfaces or reinforced concrete walls if this is not the case then ;

Above issue could be caused by occupied Wi-Fi channels around you that overlap with your ZigBee channels, to improve your signal stability and strength, please follow below instructions:

Open the ERIA app
Tap on “Settings”, Tap on “Hub”
Tap on the “I” information symbol next to the hub, you will then be directed to the HUB settings.
You will see a line called ZigBee and after it you see the channel it can b 11, 15, 20 or 25.
On the bottom there is a button “Change channel”

Make sure that all your devices are powered the devices that are not powered during the channel change will be losing their connection.

If all devices are powered, then tap on “Change channel” the channel is standard set on 15 but if you are experiencing signal issues on this channel, we advise to change it to channel 25.

To change the channel tap on “Change channel” until it moves to channel 25.

First of all, make sure that you have a ZigBee device you can recognise it from the red “Z” logo on the packaging.

Then make sure that your smart home device is listed on https://uk.adurosmart.com/product-category/works-with/ if the item is listed it means that we tested the compatibility and we can guarantee that you are able to control this smart home device with the AduroSmart ERIA hub if it’s not listed we can’t guarantee that you are able to control it, but if it’s a ZigBee certified item there is a possibility that it still works.

Make sure that you set your device into pairing mode to do this follow the instructions of the smart home device that you would like to connect to the AduroSmart ERIA hub.

Initiate the device search (pairing mode) from your ERIA app. The pairing mode is indicated by a green flashing LED indicator on your ERIA hub.

Tap on Settings, then tap on Devices and + choose your device and if your smart home device is set into pairing mode the device should show up in your app.

If you are still unable to connect the device move it closer during pairing, and move it back to the desired location after pairing.

If above is still not working try and reset your smart home device and follow above steps again.